# Article Pre-selected variation

**URL:** https://forum.shopware.com/t/article-pre-selected-variation/34947
**Category:** Allgemein
**Created:** [1. März 2016 um 17:04 UTC](https://forum.shopware.com/t/article-pre-selected-variation/34947 "2016-03-01T17:04:03Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![oakrudi](https://avatars.discourse-cdn.com/v4/letter/o/779978/32.png) [@oakrudi](https://forum.shopware.com/u/oakrudi)
#### Post date: [1. März 2016 um 17:04 UTC](https://forum.shopware.com/t/article-pre-selected-variation/34947/1 "2016-03-01T17:04:03Z")

</div>

Hey guys 🙂

Could you tell me if it’s possible to disable “pre-selected” variation? If I double click on variation and remove check it automatically select first on list.

Thanks.

---

<div class="post-metadata">

### Author: ![DanielNogel](https://avatars.discourse-cdn.com/v4/letter/d/96bed5/32.png) [@DanielNogel](https://forum.shopware.com/u/DanielNogel)
#### Post date: [1. März 2016 um 17:41 UTC](https://forum.shopware.com/t/article-pre-selected-variation/34947/2 "2016-03-01T17:41:33Z")

</div>

Hi,

you can use the „selection“ configurator for this:

![](https://europe1.discourse-cdn.com/flex013/uploads/shopware/original/2X/f/f953e984fb5604030c9f27cb9abf04c87c73d877.png)

Daniel

---

<div class="post-metadata">

### Author: ![oakrudi](https://avatars.discourse-cdn.com/v4/letter/o/779978/32.png) [@oakrudi](https://forum.shopware.com/u/oakrudi)
#### Post date: [1. März 2016 um 18:06 UTC](https://forum.shopware.com/t/article-pre-selected-variation/34947/3 "2016-03-01T18:06:28Z")

</div>

Hello Daniel,

I was around that area in your screenshot, but the maximum I’ve done it was add and delete variants.

I mean at here :  
 ![](https://europe1.discourse-cdn.com/flex013/uploads/shopware/original/2X/4/4f65eef05e9affa1a7eca72f7f4c68fca48337e9.png)

Changing Preselection value. I can’t find the “property” for this behavior. Thats why i’ve asked if preselection is mandatory

thanks

---

<div class="post-metadata">

### Author: ![DanielNogel](https://avatars.discourse-cdn.com/v4/letter/d/96bed5/32.png) [@DanielNogel](https://forum.shopware.com/u/DanielNogel)
#### Post date: [1. März 2016 um 18:28 UTC](https://forum.shopware.com/t/article-pre-selected-variation/34947/4 "2016-03-01T18:28:44Z")

</div>

Hi,

there is alway a preselection, as technically it is required to form some kind of „full“ product representation.&nbsp;However, as shown in my&nbsp;screenshot from above, you can configure the configurator to not preselect any&nbsp;variant combination on the product detail page:

That way the user will be asked to select a variant, before he can add the product to the cart.

Daniel